Simul Studio

How to get the Kodak Ektar 100 look on your phone

Bright red doors, deep blue skies, paint that looks freshly wet. Kodak Ektar 100 is the colour negative film people reach for when they want colour to be the subject, with grain so fine you barely see it. Here's what gives Ektar its character, and how to get it from your phone.

100
Fig. 1 — Colour negative, ISO 100

Open a photo in Simul Studio, or shoot through the live camera, open the Kodak group and pick Kodak Ektar 100. Choose a scene with strong colour and plenty of light, start with the standard version, then try Vibrant or a plus version for more punch, or Soft Highs and the minus versions when the light is harsh.

What Kodak Ektar 100 actually is

Ektar 100 is a professional colour negative film from Kodak, introduced in 2008. It is developed in ordinary C-41 chemistry, the same process as Portra and Gold, so any lab that handles colour film can process it. Kodak launched it with a bold claim: the finest grain of any colour negative film.

The Ektar name is older than the film. Kodak used it on lenses for decades, and then on a family of very sharp colour negative films in the late 1980s and 1990s, including the slow Ektar 25. Those films were discontinued, and today's Ektar 100 is a separate, newer film that borrowed the name.

Why Ektar photos look the way they do

Ektar is the most saturated colour negative film Kodak makes. Reds, blues and greens come out strong and clean, and contrast is higher than most negative films, so pictures have a crisp, almost slide-like snap. People often describe it as the negative film for photographers who miss slide film.

Grain is the other half of the look. At ISO 100 it is extremely fine, which makes photos look smooth and detailed, especially in skies and flat areas of colour. The trade-off is that Ektar is less forgiving than Portra. Underexposed frames tend to pick up muddy, bluish shadows, so the film is at its best with generous light.

Ektar compared with Portra, Gold and Velvia

Kodak Portra 400 is built for skin: soft contrast, gentle colour, lots of room for exposure mistakes. Ektar is the opposite brief. It gives you punchy colour and fine detail, and it can make faces look a little red, particularly in warm light.

Kodak Gold 200 is warmer and more nostalgic, with visible grain and a yellow-gold cast. Ektar is cleaner and more neutral, with more saturation and less grain. Fuji Velvia, a slide film, is bolder still, with denser shadows. If Velvia feels too heavy for a photo, Ektar is a good middle step between it and Portra.

Where the look works, and where it doesn't

Ektar suits travel photos, landscapes, architecture, street scenes with painted walls and signs, cars, markets, flowers and anything else where colour carries the picture. Bright sun and clear skies are ideal, and the fine grain holds up well when there is a lot of detail in the frame.

It is less suited to close portraits, where the saturation can push skin towards red, and to dim or very flat light, where the look loses the brightness it depends on. For people, a softer look like Portra is usually the safer pick, or use one of the gentler Ektar versions and keep faces out of direct sun.

The Ektar variations in Simul

Simul's Kodak Ektar 100 look comes with a set of versions so you can tune it without editing by hand. There is the standard look, minus versions that make it lighter, plus versions that make it stronger, Warm and Cool versions, a Contrast version, a Soft Highs version, a Vibrant version, and Blue and Magenta versions that shift the colour.

There is also a Kodak Ektar 25 look, with standard, lighter, stronger, Warm and Cool versions. Both are colour looks, and they work in the live camera or on photos you have already taken. Grain stays adjustable in the darkroom, so you can fine tune it after picking a version.

How to get the look in Simul

  1. Pick a photo where colour is the point: a blue sky, a painted wall, a market stall, a car, a garden.
  2. Open it in Simul Studio, or shoot through the live camera, open the Kodak group and pick Kodak Ektar 100.
  3. Start with the standard version. For more punch try Vibrant or a plus version; if the light is harsh, try Soft Highs or a minus version.
  4. In the darkroom, keep grain low to match the film's fine grain, then export.

Ektar likes light. Shoot in sun or bright shade, and expose for the brighter parts of the scene so colours stay clean. If someone's face is the main subject, compare the result with Kodak Portra 400 before you export. Edits are non-destructive, so you can always go back to the original.

Free download

Questions

Is there a Kodak Ektar filter for iPhone?

Simul Studio has film-inspired Kodak Ektar 100 and Kodak Ektar 25 looks, each with lighter, stronger, warmer and cooler versions. Use them in the live camera or on photos you've already taken, on iPhone or Android.

What's the difference between Ektar 100 and Portra 400?

Both are Kodak colour negative films. Ektar 100 is slower, more saturated and higher in contrast, with very fine grain. Portra 400 is softer and more forgiving, and it is kinder to skin. Ektar suits landscapes and travel; Portra suits people.

Is Ektar good for portraits?

It can be, but it needs care. Its strong saturation can make skin look red, especially in warm light. For portraits, try a gentler Ektar version or a softer film look like Kodak Portra 400.

Do I need a subscription?

No. Simul Studio is free to download and try, with no subscription and no account.

Keep reading

Simul Studio's looks are film-inspired recreations. Simul Studio isn't affiliated with or endorsed by Kodak, Fujifilm, Ilford or Polaroid; film names are used only to describe the look.